Description
Alien Drive Systems Electric longboard DIY kit 63mm motors
PLEASE NOTE: (TRUCK, WHEELS AND MOTOR ARE NOT INCLUDED. THEY ARE FOR ILLUSTRATION ONLY)
THE KIT INCLUDE ALL THE PARTS FOR 1 WHEEL TRANSMISSION. IF YOU NEED A DUAL SUT UP YOU NEED 2X KIT
Options:
83mm wheels, 130KV motor, 10S lipo battery system, 15T\32T gear – Top Speed 23 MPH
83mm wheels, 170KV motor, 10S lipo battery system, 15T\32T gear – Top Speed 30 MPH
83mm wheels, 190KV motor, 10S lipo battery system, 15T\32T gear – Top Speed 33 MPH
83mm wheels, 230KV motor, 10S lipo battery system, 15T\32T gear – Top Speed 40 MPH
Please note:
This chart is a precise calculation based on gear-battery system and wheel size. The actual performance will be effected depending on road conditions, total weight, battery capacity and voltage. On avarage the actual top speed is around 3-4 MPH lower than the values above .
Increasing the wheel diameter without modifying the gears will increase the top speed. Decreasing the wheel diameter will have the opposite effect.
Increasing the hub pulley teeth without modifying the other parts will decrease the top speed. Decreasing the hub pulley teeth will have the opposite effect.
Increasing the motor pulley teeth without modifying the rest of the components will increase the top speed. Decreasing the motor pulley teeth will have the opposite effect.
- 32T-HTD5 HUB DRIVE PULLEY
- 15T-HTD5 motor pulley, 10mm bore, 3mm keyway
- 280mm-HTD5 9mm belt
- 3mm x15mm keyway
- Mounting screws
- Truck clamp:
These new Clamps are now universal in fitting and can be used on the Left hand /Right hand or at the rear/front of the truck. Clamping force has been significantly improved with a wider clamp area and deeper threaded holes. Machined from Aircraft grade 6082 Alloy
- Motor mount plate:
Motor mount plate is designet to fit 40mm, 50mm or 63mm motors. Hole spacing from 26mm-46mm. Machined from Aircraft grade 6082 Alloy
- Clamp ring:
The 30mm x 15mm wide clamp ring can have pretty much any profile shape cut into it either by waterjet or DIY 3D printing. Please choose our waterjet options from the drop down box.
- Pulleys:
These pulleys will fit all Alien Drive Hubs and may require a longer belt if your changing ratios
- Hub Drive
The ‘Hub’ of the whole Alien Drive kit- This adapter allows the use of our wheel options and enables it to be driven by a toothed belt. The Adapter come complete with retainers and fasteners and your choice of toothed pulley wheel- to suit your desired ratio. The adapters are CNC machined from billet 6082 Aircraft grade Aluminium to a very high tolerance – making them both hard wearing and super accurate and also allows the ability to change pulley ratios simply.
- Hub Drive retainer
Waterjet aluminium retainer for ABEC 11 flywheel and similar, CNC machined from billet 6082 Aircraft grade Aluminium washer for Orangatang Kegel and similar
