Sale!

APS 200A 4-14S AIR ESC HV OPTO

£ 229.00 £ 189.00

Only 2 left in stock (can be backordered)

SKU: APS 200A 4-14S AIR ESC HV OPTO Categories: , , Tag:

Description

SPECIFICATION:

Max Current: 200A
Burst Current: 240A for 5 seconds
Input Voltage: 4-14 cells Li-XX
BEC: OPTO
PWM: 8~16 KHz
Max RPM: 240,000rpm for 2 Poles Brushless Motor
PCB Size: 107 x 53 x 30mm
Weight: 230g
Optional programming card for convenient setup
ESC had separate programming lead built-in so there is no need to unplug from RX
Super fine throttle resolution provides first-rate and highly accurate linearity
Super smooth adjustable start-up mode
Constant RPM mode (governor mode)
Adjustable F3A brake.
3 steps adjustable normal EMF brake
High anti-interference capability
Low voltage cut-off protection with automatic adjustment for NiCd/NiMH/Li-Ion/LiPo/LiFePO4
Soft cut-off option at low voltage, slows motor RPM gradual rather than hard cutoff (LVC)
Low voltage cut-off can be disabled
Variable cut-off voltage / cell
Active free-wheeling circuit allows for unlimited “partial load” capability
LED status display
Adjustable motor timing from 0° to 30°
Blocked rotation protection (senses a jammed motor and stops motor rotation)
Motor reversing from ESC (no need to change ESC/motor wires)
Over-temperature protection and overload alarm
Anti sparking circuit: reduces connection sparks
Throttle signal lose protection. If the signal is lost for 3 seconds, the power will automatically cut-off.
Safe power-on. (Motor will not start until throttle is returned to lowest position)

PLEASE NOTE: Alien Electronics LTD adopts a continuous development program which sometimes necessitates specification changes without notice. Pictures of products and information in the instructions manual are for reference only and can be changed without notice at any time. Colors of goods are subject to stock availability

Additional information

Weight 0.230 kg