Sale!

APS 100Amp 3KW single motor E-board DIY Kit

£ 179.00£ 189.00

SKU: APS 100Amp 3KW single motor E-board DIY Kit Categories: , Tag:

Description

This is the single 3Kw system by Alien Power System.
Kit is made for work with the Alien drive kit 32t for 63mm motor

The system includes:
1- ESC 100Amp 5-12S with BEC.
2- 1 x 63mm Alien motor, 170KV, 3000watt, 70Amp, 63mmx74mm, 10mm shaft, 10t, weight: 750g complete of 3mm keyway on the shaft to fit pulley or sprocket. The new Alien motors are customized products.
3- USBĀ Adapterto program the controller by PC.

ESC Specs:
Output: Continuous 120A, burst 180A up to 10 seconds
Input Voltage: 5-12 cells lithium battery or 15-36 cells NiMH battery
BEC: 5V
Refresh rate of the throttle signal: 50Hz to 432Hz
Control Signal Transmission: Optical/electrical coupled system
Max Speed: 210000rpm for 2 Poles BLDC, 70000rpm for 6 poles BLDC, 35000rpm for 12 poles BLDC
Size: 88 x 55 x 15 (mm)
Weight: 125g.

Features:
High performance microprocessor, best compatibility with all kinds of motors, highest driving efficiency.
Anti-spark circuit eliminates sparks when the battery pack is connecting with the ESC.
Three types of start mode: Normal / Soft / Very-Soft, compatible with aircraft and helicopter.
Smooth, linear, quick and precise throttle response.
Multiple protection features: Low-voltage cut-off protection / Over-heat protection / Throttle signal loss protection.
The throttle signal is transfered through optical/electrical coupled system to avoid electromagnetic interference.
Perfect governor mode for helicopter.
Wide-opened heat-sink has the best heat dissipation effect.
The firmware of the ESC can be updated through the built-in USB adapter in the
Programmable by transmitter

Motor Specs:

MOTOR: 6374
KV: 170
MAX POWER: 3000W
WIRE WINDS: 10
MAX AMP: 70A
ESC: 100/150A
MAX VOLT: 10S
RESISTANCE: .56
NO LOAD CURRENT: 1,4
SIZE: 63 x 74 ( without shaft )
WEIGHT (g): 0,750
SHAFT: 10mm with 3mm keyway
Accessory pack: NO
Keyway: 3mm

The ESC can be used in sensor mode by simply plug the motor sensor plug. User will only need to match the phases wires with the sensors.

If you require any customisation, such a different amp, power, different application, specific parts (capacitors, mosfet ext.) then please ask as i can provide these.

Additional information

Weight 1.000 kg
Motor

Sensorless motor, Sensored motor